ASME SA 789 UNS S32760 Welded Tubing and Super Duplex Tube supplier in India

The use of super duplex stainless steel extends to some of the most demanding applications across several industries. With significant additions of chromium, molybdenum, and nickel, Super Duplex Tubing brings about superiority in terms of both corrosion resistance and mechanical properties. The addition of nitrogen in the alloy increases the stability of austenite in the microstructure of Super Duplex 2507 Tube. The microstructure also contains a mix of both austenite and ferrite in an almost equal ratio of about 50%. The exceptional protection to chloride pitting as well as resistance to attack from crevice corrosion is why many Super Duplex Tube suppliers recommend the use of these components in industries like Flue Gas Scrubbing, Offshore Oil production /technology, Pulp & Paper Mills as well as the Oil and gas industry.

Though the Super Duplex 2507 Seamless Tube has many good properties, they face limitations with regards to their use at elevated temperatures. Special emphasis is placed on the Super Duplex 2507 Tubing produced according to specification  ASTM A789 as using them beyond a temperature of 600° F could have detrimental effects. Firstly, there is a loss in both the toughness and corrosion resistance properties. Next, the ASTM A789 UNS S32760 tube is prone to becoming brittle on prolonged exposure beyond 600° F. Usually, a Heat and product analysis, along with mechanical tests are performed over the ASTM A789 UNS S32750 to check their conformance to the specification.  Under this specification, the furnishing of every Super Duplex Welded Tube in a heat treated state must be in accordance with the particularised temperature as well as quench conditions.

Manufacturer and supplier of Super Duplex 2507 Tube in both grade ASTM A789 UNS S32760 & ASME SA 789 UNS S32750

Super Duplex 2507 Tube

Super Duplex 2507 Tube

Super Duplex Stainless Steel Tube

Super Duplex Stainless Steel Tube

ASTM A789 UNS S32750 Seamless Tubing

ASTM A789 UNS S32750 Seamless Tubing

Table of contents

Super Duplex 2507 Tube Available Sizes

Manufacturer of SCH 40S Super Duplex Tubing, SDSS Instrument Tubing and SAF 2507 Subsea Tube as per ASME B36.19 and ASTM A789, View our sizes and dimension table

UNS S32750 Super Duplex Seamless Tube

  • Size (OD): .375" through 1" OD
  • Wall Thickness : .035" through .065"

UNS S32750 Super Duplex Welded Tube

  • Size (OD): .125" OD through 1" OD
  • Wall Thickness : .035" through .109" wall

2507 Super Duplex Seamless Tube Specification

ASME SA 789 UNS S32760 Capillary, Round Tube, Square Tube and Boiler Tubing suppliers accordance to ASME B36.19M, ISO15156 and NACE MR0175 for marine environments

Super Duplex 2507 Tube International Specification
  • ASTM A 789 ASME SA 789
  • ASTM A789 UNS S32750
  • ASTM A789 UNS S32760
Standard Specification of UNS S32750 Super Duplex Tubing ASME, EN, ASTM, JIS, NF, AMS, AISI, DIN, DS, GB, SAE, DTD, TOCT
2507 Super Duplex Tube Standard Tolerances +/- 0.030; tolerance may vary depending on grade and thickness
UNS S32750 Super Duplex Seamless Tube Size
  • 15 NB to 150 NB IN
  • 1/2" OD - 12" OD
2507 Super Duplex Welded Tube Size
  •  1/2" OD - 12" OD
  • Guage: 25 SWG - 10 SWG
UNS S32760 Super Duplex Saf 2507 Tube Length Upto 30 meters, Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded, or Custom Cut Lengths
UNS S32750 Duplex Alloy 2507 Tube WT 0.40 mm - 12.70 mm
UNS S32750 Super Duplex 2507 Tube Schedule 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
Super Duplex SS UNS S32750 Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
ASTM A789 UNS S32760 Tubes manufacturing techniques EFW, ERW, LSAW, Seam-Welded, CEW, DOM, Welded, Seamless, Redrawn, CDW, Fabricated
Origin of UNS S32760 Duplex Steel 2507 Tube material Indian, European, Korean, Japanese
ASME SA 789 UNS S32760 Tube End Types
  • TOE / BOE = Treaded One End / Bevelled One End
  • BLE : Bevel large end
  • POE / BOE = Plain One End / Bevelled One End
  • PBE = Plain Both Ends
  • BBE : Bevel both ends
  • TOE / POE = Treaded One End / Plain One End
  • TBE = Treaded Both Ends
  • BE : Bevelled end
  • BSE : Bevel small end
UNS S32750 Duplex Alloy 2507 Tube End Finish low-burr, burr-free, brushed, trovalised
ASTM A789 UNS S32760 Tubes Form Round, Square, Oval, Rectangular, Coil, "U" Shape, Hydraulic & Honed Tubes
Super Duplex SS 2507 Tube Delivery Condition
  • Welded, calibrated
  • Welded and redrawn
  • Seamlessly drawn
  • Polished
  • Annealed and Pickled
  • Hot Finished
  • Bright Annealed
  • Cold Drawn
2507 Super Duplex Stainless Steel Tube Packing
  • Ply Wooden Boxes
  • PE Fabric Bundles
  • Steel Strips Bundled
  • Standard seaworthy export packing
  • Plastic Bags, or as required
Super Duplex 2507 UNS S32760 Tube Value Added Services Cut to size, thread, and groove
Port Mumbai, India
Stocking distributor of leading Super Duplex 2507 Tube manufacturers
  • Sanyo Special Steel, Japan
  • Schoeller Bleckmann, Austria
  • Nippon Steel Corporation, Japan
  • Sumitomo Metals, Japan
  • Seah Steel Corporation, Korea
  • Kobe Special Tube, Japan
  • Tubacex Tubos Inoxidables S.A., Spain
Super Duplex 2507 UNS S32760 Tube Dimensional Specification ANSI/ ASME B36.10, B36.19, B2.1
Marking on 25cr Super Duplex Steel Tube
  • Specification
  • Material Grade
  • Nominal Size
  • Schedule or Wall Thickness
  • Method of Manufacturing (Seamless or Welded)
  • Heat Number
  • Supplier / Manufacturer’s Name or Custom Logo - on request
Marked Tube Sample: ASTM A789 UNS S32750 12" NB SCH 40S SEAMLESS HEAT NO. XXXX
Application wise types of UNS S32760 Duplex Steel 2507 Tubes ASME SA 789 UNS S32760 Oil Tube, Gas Tube, Fluid Tube, Boiler and UNS S32760 Super Duplex Saf 2507 Heat exchanger Tube

Many Super Duplex Tube suppliers, stockholders,exporters, importers, dealers, and distributors purchase 2507 Tubing from Oshwin Overseas and distribute in their own countries with higher margins, so contact Oshwin directly to check our price list to get the best price in India. Contact us now for Free quote !!!

UNS S32750 Super Duplex 2507 Tubing Tests are normally carried out

  • Mill Test Certificates with all Super Duplex 2507 Tube
  • EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
  • 100% inspection according to NACE standards
  • NABL Approved Lab Reports
  • Mechanical Reports
  • PMI Test Reports
  • Visual Inspection Reports
  • Third Party Inspection for UNS S32750 Super Duplex Tubing
  • Raw Materials Certificate
  • Destructive Test Report
  • Chemical Reports
  • Heat Treatment Charts
  • Form A for Generalized System of Preferences (GSP)
  • HS Code Commercial Invoice
  • Fumigation Certificates
  • Non Destructive Test
  • 100% Radiography Test Report for UNS S32750 Duplex Alloy 2507 Tube
  • Surface roughness measurement report
  • Laboratory Test Certificate from Govt. Approved Lab
  • Moisture testing

Super Duplex SS UNS S32750 Tube Price in India

BE End Super Duplex Stainless Steel Tube supplier in various sizes & surface finish, Manufacturer and exporter of SDSS 2507 Heat Exchanger Tubes in exact sizes, Get free quote Now!

Alloy 2507 Tube *Price Start range per Kg ex Mumbai
Manufacturing Type USA FOB Price* Europe FOB Price * Malaysia FOB Price* Singapore FOB Price*
2507 Seamless Tube US $ 26 21.17 Euro 104.96 Malaysia Ringgit 34.42 Singapore Dollar

Super Duplex Stainless Steel Tube Price today in India is 500-700/ Kg Indian Rupee (INR)/ Alloy 2507 ASTM A789 UNS S32750 / ASTM A789 UNS S32760. This is equal to 34.58 (AED) United Arab Emirates Dirham and 10.04 (USD) United States Dollar

Contact us for Free quote and sample, you can also mail us on export@oshwin.com.

Types of Super Duplex 2507 Tube

UNS S32750 Super Duplex Welded Tube

UNS S32750 Super Duplex Welded Tube

2507 Super Duplex Seamless Tube

2507 Super Duplex Seamless Tube

UNS S32750 Super Duplex 2507 Round Tube

UNS S32750 Super Duplex 2507 Round Tube

Super Duplex SS UNS S32750 Rectangular Tube

Super Duplex SS UNS S32750 Rectangular Tube

UNS S32750 Duplex Alloy 2507 Square Tube

UNS S32750 Duplex Alloy 2507 Square Tube

ASTM A789 UNS S32760 Schedule 5S Tube

ASTM A789 UNS S32760 Schedule 5S Tube

UNS S32760 Duplex Steel 2507 Schedule 40S Seamless Tube

UNS S32760 Duplex Steel 2507 Schedule 40S Seamless Tube

ASME SA 789 UNS S32760 Polished Tube

ASME SA 789 UNS S32760 Polished Tube

UNS S32760 Super Duplex Saf 2507 Exhaust Tubing

UNS S32760 Super Duplex Saf 2507 Exhaust Tubing

Super Duplex SS 2507 Heat Exchanger Tube

Super Duplex SS 2507 Heat Exchanger Tube

2507 Super Duplex Stainless Steel Boiler Tube

2507 Super Duplex Stainless Steel Boiler Tube

Super Duplex 2507 UNS S32760 Capillary Tube

Super Duplex 2507 UNS S32760 Capillary Tube

25cr Super Duplex Steel Gas Tube

25cr Super Duplex Steel Gas Tube

ASME SA 789 UNS S32750 ERW Tube

ASME SA 789 UNS S32750 ERW Tube

Super Duplex UNS S32750 EFW Tube

Super Duplex UNS S32750 EFW Tube

ASTM A789 UNS S32750 SCH 40 Seamless Tube

ASTM A789 UNS S32750 SCH 40 Seamless Tube

25cr Super Duplex Steel Precision Tubes

25cr Super Duplex Steel Precision Tubes

ASME SA 789 UNS S32750 Coiled Tube

ASME SA 789 UNS S32750 Coiled Tube

Super Duplex UNS S32750 Condenser Tube

Super Duplex UNS S32750 Condenser Tube

ASTM A789 UNS S32750 Instrument Tubing

ASTM A789 UNS S32750 Instrument Tubing

Complete range of UNS S32750 Duplex Alloy 2507 Tubes

ASME SA 789 UNS S32760 Square Tube 2507 Super Duplex Stainless Steel Sanitary Tubing
UNS S32760 Super Duplex Saf 2507 Exhaust Tubing 1 inch Super Duplex 2507 UNS S32760 Tubing
UNS S32750 Super Duplex Square Tubing UNS S32750 Super Duplex 2507 Hollow Tubes
2507 Super Duplex Round Tubes Re Drawn Super Duplex SS UNS S32750 Tubing
UNS S32750 Super Duplex Seamless Tube Super Duplex SS UNS S32750 Coil Tubes
25cr Super Duplex Steel High Pressure Tubes ASTM A789 UNS S32750 Elliptical and Oval Tubes
ASTM A789 UNS S32750 Round Tubing 2507 Super Duplex Finned Tubes
Super Duplex SS 2507 Rectangular Tubing UNS S32750 Duplex Alloy 2507 Coiled Tubing
UNS S32750 Super Duplex 2507 ERW Tubes High Pressure ASTM A789 UNS S32760 Tube
Super Duplex SS UNS S32750 Capillary Tubing UNS S32760 Duplex Steel 2507 Heat exchanger Tube
UNS S32750 Duplex Alloy 2507 Hydraulic Tubing ASME SA 789 UNS S32760 Condenser Tubing
ASTM A789 UNS S32760 Welded Tube Thin Wall UNS S32760 Super Duplex Saf 2507 Tubing
12mm Super Duplex UNS S32750 Tubing Super Duplex SS 2507 Polish Tubing
Super Duplex 2507 UNS S32760 Small Diameter Tubing 25cr Super Duplex Steel Tube Bends

ASTM A789 UNS S32760 Boiler Tube Specific Temperature Range

Suitable to use Upto 600° F (316° C).

UNS S32760 Duplex Steel 2507 Heat Exchanger Tube Coating Standards

  • thick film epoxy cladding
  • Curran 1000 T Hybrid Epoxy
  • Phenol Epoxy
  • Novolac Epoxy
  • Curralon ®
  • Sakaphen- Shell and tube heat exchanger lining
  • High Functionality Epoxy - Curran Coating
  • Curran 1000T

ASME SA 789 UNS S32760 Square Tube size and weight

Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg)
12.7 x 12.7 1.20 0.44 40 x40 1.20 1.49
12.7 x 12.7 1.50 0.55 40 x40 1.50 1.85
15 x 15 1.20 0.53 40 x40 2.00 2.45
15 x 15 1.50 0.65 40 x40 3.00 3.75
20 x 20 1.20 0.71 50 x50 1.50 2.32
20 x 20 1.50 0.88 50 x50 2.00 3.08
20 x 20 2.00 1.19 50 x50 3.00 4.65
25 x 25 1.20 0.92 60 x60 2.00 3.71
25 x 25 1.50 1.14 60 x60 3.00 5.49
25 x 25 2.00 1.49 70 x70 3.00 6.53
25 x 25 3.00 2.20 80 x80 2.00 4.98
30 x 30 1.20 1.10 80 x80 3.00 7.53
30 x 30 1.50 1.37 100 x 100 2.00 6.40
30 x 30 2.00 1.84 100 x 100 3.00 9.53
30 x 30 3.00 2.72

UNS S32760 Super Duplex Saf 2507 Capillary Tube Size Chart

Gauge Outside Diameter Tolerance mm Regular Wall (RW) mm Thin Wall (TW) mm Extra Thin Wall (XTW) mm Ultra Thin Wall (UTW) mm
30 0.304 - 0.317 0.064 - 0.089
29 o.330 - 0.342 0.064 - 0.089
28 0.355 - 0.368 0.076 - 0.102
27 0.406 - 0.419 0.089 - 0.115 0.064 - 0.089
26 0.457 - 0.469 0.089 - 0.114
25 0.508 - 0.520 0.115 - 0.140 0.089 - 0.114
24 0.558 - 0.571 0.114 - 0.140 0.089 - 0.114 0.051 - 0.102
23 0.635 - 0.647 0.140 - 0.165 0.089 - 0.114 0.051 - 0.102
22 0.711 - 0.723 0.140 - 0.165 0.096 - 0.121 0.077 - 0.102 0.051 - 0.102
21 0.812 - 0.825 0.140 - 0.165 0.102 - 0.127 0.051 - 0.102
20 0.901 - 0.914 0.108 - 0.165 0.108 - 0.134
19 1.054 - 1.079 0.166 - 0.216 0.102 - 0.140 0.070 - 0.108
18 1.257 - 1.282 0.191 - 0.241 0.127 - 0.165 0.083 - 0.121 0.051 - 0.102
17 1.460 - 1.485 0.177 - 0.229 0.115 - 0.152 0.083 - 0.127 0.057 - 0.102
16 1.638 - 1.663 0.204 - 0.254 0.127 - 0.165 0.096 - 0.133 0.070 - 0.121
15 1.816 - 1.841 0.204 - 0.254 0.127 - 0.165 0.096 - 0.134 0.070 - 0.121
14 2.082 - 2.133 0.216 - 0.292 0.165 - 0.229 0.114 - 0.165 0.076 - 0.134
13 2.387 - 2.438 0.267 - 0.343 0.191 - 0.267
12 2.743 - 2.749 0.267 - 0.321
11 3.023 - 3.073 0.293 - 0.368 0.216 - 0.292
10 3.378 - 3.429 0.318 - 0.394 0.216 - 0.292

N.B (a) Any intermediate size can be supplied on request.
(b) Supplied in sufficiently hard condition and also tested for the stiffness.

Super Duplex SS 2507 Exhaust Tubing Gauge Thickness

GAUGE THICKNESS RANGE (INCH) TYPICAL VALUE (INCH)
22 0.025 - 0.029 0.028
20 0.031 - 0.035 0.035
19 0.038 - 0.042 0.042
18 0.044 - 0.049 0.049
17 0.053 - 0.058 0.058
16 0.060 - 0.065 0.065
15 0.066 - 0.074 0.072
14 0.075 - 0.085 0.083
13 0.087 - 0.097 0.095
12 0.101 - 0.111 0.109
11 0.112 - 0.122 0.12
10 0.126 - 0.136 0.134
9 0.140 - 0.150 0.148
8 0.157 - 0.167 0.165
7 0.175 - 0.185 0.18

2507 Super Duplex Stainless Steel Welded Tube Tolerances

  • Straightness: .030" in 3"
  • Wall Tolerance +/- 10%
O.D. Inches Wall Thickness Inches O.D. +/- Inches
1/2" to 1" incl. .025 to .065 .005
Over .065 to .134 .010
1 to 1-1/2" incl. .025 to .065 .008
Over .065 to .134 .010
1-1/2" to 2" incl. .025 to .049 .010
Over .049 to .083 .011
Over .083 to .148 .012
2" to 2-1/2" incl. .032 to .065 .012
Over .065 to .109 .013
Over .109 to .165 .014
2-1/2" to 3-1/2" incl. .032 to .165 .014
Over .165 to .220 .020
3-1/2" to 5" incl. .083 to .165 .020
Over .165 to .220 .025

Super Duplex 2507 UNS S32760 Round Tube Other Value Added Facilities

  • We cut UNS S32750 Super Duplex welded tubing to your exact dimension
  • 2507 Super Duplex Tubing can be polished per customer specification
  • Beveling UNS S32750 Super Duplex 2507 tubes
  • Heat treating & annealing
  • Honing/ turning process for Super Duplex 2507 Tube
  • Additional positive material identification (PMI) testing if required
  • Ultrasonic Testing (UT)

25cr Super Duplex Steel Seamless Tube Chemical Structure

Grade Super Duplex 2507
Carbon (C) Max. 0.030
Manganese (Mn) Max. 1.20
Phosphorous (P) Max. 0.035
Sulphur (S) Max. 0.020
Silicon (Si) Max. 0.80
Chromium (Cr) 24.0–26.0
Nickel (Ni) 6.0–8.0
Molybdenum (Mo) 3.0–5.0
Nitrogen (N) 0.24–0.32
Iron (Fe) Bal.
Copper (Cu) 0.50
Other Elements -

ASME SA 789 UNS S32750 Tube Mechanical Properties

Physical Properties of Super Duplex 2507 Tube in the Annealed Condition at -20°F to +100°F


   Tensile Strength Yield Strength              
Alloy UNS Designation Spec. psi MPa ksi psi MPa ksi Elongation in 2 in. (min.) % Grain Size Req. Max. Hardness Modulus of Elasticity (x106psi) Mean Coefficient of Thermal Expansion (IN./IN./°F x 10-6) Thermal Conductivity (BTU-in/ ft2-h-°F)
2507 S32950 A789, A790 100,000 690 100 70,000 485 70 20 - 30.5 Rc - - -
2507 S32750 A789, A790 116,000 800 116 80,000 550 80 15 - 32 Rc 27.5 7.2 98

Super Duplex UNS S32750 Tube Equivalent Standard

Alloy UNS Designation Werkstoff NR. Specifications AFNOR Grade 1.4410
2507 S32750 1.4410 A/SA789, A/SA790 Z3 CN 25.06 Az F53 X2 Cr Ni MoN 25.7.4

ASTM A789 UNS S32750 Tube Standard Tolerances

  Size Range   Standard Tolerances
Form OD Wall Lengths and/or coils Grades OD Wall Lengths
Pressure & Corrosion Tubing

Meets or exceeds requirements for welded

Specification: ASTM-A789

 1/16" (1.59 mm) - 4" (101.6 mm)

Metric sizes also available

 0.010" (0.25 mm) - 0.220" (5.59 mm) Random or cut lengths up - 40' (12.2 m)

Coils to 1-1/2" OD

 Super Duplex 2507
<1-1/2" (38.1 mm) ±0.005" (0.13 mm)
1-1/2" (38.1 mm) to 3" (76.2 mm) ±0.010" (0.25 mm)
3-1/2" (88.9 mm) to 4" (101.6 mm) ±0.015" (0.38 mm)
 ±10% Randoms up to +2" (50.8 mm)

Cuts +1/8" (3 mm) -0"

Coils to 80,000' (24,384 m)
Subsea Umbilical Tubing

Specifications: ASTM-A789 and ASTM-A790

 3/8" (9.53 mm) to 1-1/2" (38.1 mm) 0.039" (0.99 mm) to 0.125" (3.18 mm) Cut lengths to 60' (18.3 m)

Coils to 1-1/2" OD*

 Super Duplex 2507 ±0.005" (0.127 mm) ±10% Coils to 80,000' (24,384 m)