Cold drawn and bright annealed SS 304 Ultra Thin Wall Pipe manufacturer in India
Stainless steel thin wall tubing is made with a wall thickness to diameter ratio of less than 6%. These tubes are used in low pressure, low temperature and high sensitive applications. The stainless steel thin wall pipe can be made in different material grades and in different standard specifications. The advantage of these thin wall 304 stainless steel tubing is that they hold less weight to volume as well. The 304 material is an 18/8 chromium nickel austenitic stainless steel with good strength and general corrosion resistance. The thin wall 316 stainless steel tubing is use with marine and sea water applications due to the high resistance to chloride ion media. The chloride ion resistance come from the 4% molybdenum addition to the composition. There are also ultra thin wall stainless steel tubing products that have very thin walls. These are used in tools, equipment and in high precision applications. The sizes, diameters, lengths and wall thicknesses vary according to different applications. The thin wall stainless steel tubing suppliers produce these pipes in sizes ranging from ¼ inches to 2 inches and custom sizes. The wall thickness vary from 1mm to 30mm depending on the application requirements. The thin wall stainless tube is cost effective, strong, corrosion resistant and lasts longer under general corrosive applications. The different grades of the thin wall stainless pipe can be used for different application types such as sea water, marine, food processing, power generation, heat exchanger, oil and gas and in nuclear industrial applications.