Designed to be efficient, the SS Condenser Tubes can be used in various applications including from being part of a condenser and evaporator refrigeration cycle in a chiller, to condense steam in a surface condenser, heat exchangers, in addition to everything in between.
The main purpose of a SS Condenser Tubing Heat is to condense process fluids off of the outside of these tubes. With regards to the outer diameter of these tubes, we as leading Condenser Tubing Suppliers are able to supply them in the following sizes i.e. - 5/8", 3/4", and 1". However, as observed by many of our buyers in the industry, those applications which are involved in ammonia chillers, could have a larger diameter Stainless Steel Condenser Tubes. All the same, if required by our clients, the Corrugated Stainless Steel Tubing Condenser could be enhanced either internally or externally in order to optimise their levels of efficiency. In applications where the tubes are prone to be affected by intergranular corrosion, a low carbon based Stainless Steel 316l Condenser Tubes exemplifies their superior performance. Whereas in those areas which require moderate corrosion and tensile strength properties at an economical price, Stainless Steel 304 Condenser Tubes are considered to be ideal here. You can find out more about the price of SS Steam Condenser Tube Material.
| Grades | 304, 304L 304H 304N 304LN, 316, 316L 316Ti 316N, 316LN, 321 321H, 310S 310H, 309S, 317, 317L 347 347H |
| ASTM Specification | ASTM A213, ASTM A269, ASTM A312 |
| Manufacturing Type | Seamless / ERW / Welded / Fabricated / CDW / CDS / DOM / CEW / 100% X Ray Welded |
| Delivery Condition | Annealed and Pickled (AP), Polished, Bright Annealed (BA), Cold Drawn, MF |
| International Standard |
|
| Processing Service | Bending, Welding, Decoiling, Punching, Cutting, Moulding |
| Technique | Cold drawn, Cold rolled, Hot rolled, Extrusion Tube |
| Port | Mumbai, India |
| Manufacturer of |
| ASTM A213/ ASME SA 213 | Temperature Range (ºC [ºF]) | Yield Stress (min. MPa) | Tensile Stress (min. MPa) | Elongation (min. %) | Hardness (max. Rockwell) |
|---|---|---|---|---|---|
| TP304H | 590 [1095] | 205 | 515 | 35 | 90 HRB |
| TP310H | 590 [1095] | 205 | 515 | 35 | 90 HRB |
| TP321H | 600 [1110] | 205 | 515 | 35 | 90 HRB |
| TP347/347H | 610 [1130] | 205 | 515 | 35 | 90 HRB |
| TP347HFG | 650 [1200] | 205 | 550 | 35 | 90 HRB |
| TP316H | 610 [1130] | 205 | 515 | 35 | 90 HRB |
| S30432 | 650 [1200] | 235 | 590 | 35 | 95 HRB |
| TP310HCbN | 670 [1240] | 295 | 655 | 30 | 100 HRB |
| Sizes in Inches | Sizes in Decimal | Sizes in mm |
| 1/16" | .0625 | 1.59 mm |
| 1/8" | .1250 | 3.18 mm |
| 3/16" | .1875 | 4.76 mm |
| 1/4" | .2500 | 6.35 mm |
| 5/16" | .3125 | 7.94 mm |
| 3/8" | .3750 | 9.53 mm |
| 7/16" | .4375 | 11.11 mm |
| 1/2" | .5000 | 12.70 mm |
| 9/16" | .5625 | 14.29 mm |
| 5/8" | .6250 | 15.88 mm |
| 11/16" | .6875 | 17.46 mm |
| 3/4" | .7500 | 19.05 mm |
| 13/16" | .8125 | 20.64 mm |
| 7/8" | .8750 | 22.23 mm |
| 15/16" | .9375 | 23.81 mm |
| 1" | 1.00 | 25.40 mm |
| 1 1/4" | 1.25 | 31.75 mm |
| 1 1/2" | 1.50 | 38.10 mm |
| 2" | 2.00 | 50.80 mm |
