SS 316Ti Instrumentation Fittings & UNS S31635 316Ti Ferrule Fittings manufacturer in India
Coming second to grade 304, grade 316 displays properties that are much higher than the former alloy. Be it resistance to corrosion or mechanical properties, grade 316 is a significant improvement over grade 304. An austenitic alloy, the composition of Stainless Steel 316Ti Tube Fittings has been modified with the inclusion of 0.5% titanium. Titanium, when added to an austenitic alloy component such as grade 316Ti ASTM A182 Ferrule Tee, increases the possibility of carbide stabilization. This phenomenon is very important, especially if the fitting is to be welded.
The titanium present in SS316Ti 1.4571 Hydraulic Fittings gets attached to the carbon atom to form titanium carbides. Generally, titanium carbides tend to be entirely stable and they are hard to dissolve in the alloy. Thus, the formation of titanium carbide on the surface of the 316Ti Stainless Steel Compression Fittings is what effectively eliminates the event of inter-granular corrosion. The fittings are produced either as hot-finished or cold-finished in several conditions. The SS 316Ti Instrumentation Fittings furnished in condition A are annealed, whereas components hardened and tempered are referred to as condition H. Similarly if the UNS S31635 316Ti Ferrule Fittings are furnished according to condition S, they are strain hardened or comparatively light cold worked. Mechanical tests performed on the ASTM A276 Tube adapters circumscribe its properties such as elongation, Brinell hardness, tensile and yield strength.
Buy 316Ti Stainless Steel Compression Fittings in various thread forms
Os-Lok is your superior alternative to Swagelok fittings & Parker A-lok. Similar to Parker Instrumentation fittings, Os-Lok Stainless Steel 316Ti Tube Fittings work reliably on both seamless and welded-redrawn, fully annealed SA 213 TP304, SA 213 TP316 and SA 213 TP316L Tubing.
