Alloy 800 Welded Tubing & ASTM B163 UNS N08800 Incoloy 800 Tube supplier

As typical of most nickel-chromium alloys, Incoloy 800 has excellent mechanical properties and their corrosion resistance properties surpass many stainless steel alloys. Incoloy 800 Tube manufacturers produce these components keeping in accordance with ASTM B163. Per this specification, the tubes are practical for use in heat exchangers as well as for condensers. The main function of a condenser in an industry is to condense a gas by conversion of its gaseous state into a liquid one. Condensation is a process that takes place through cooling. Components like a steel pipe, when exposed to very high heat, are prone to getting carburised.

However, the use of  ASTM B163 UNS N08800 as a part of condensation or heat exchangers can be justified, because the alloy can withstand elevated temperature settings. At high temperature and pressure, conventional steel alloys are subject to failure. Which means regular alloys face severe loss of mechanical properties including toughness, ductility, and resistance to cracking, leading to an eventual decay by intergranular corrosion. But, that is not the case with W. Nr. 1.4876 Tubes. The high content of nickel present in the Alloy 800 Tube makes it resilient to becoming brittle due to the precipitation of sigma phase. Along with nickel, its heat resistance properties make the Incoloy 800 Seamless Tube a unique addition to industries like steam power plants or in chemical processing plants for example - distilleries, even if they are slightly more expensive than a welded type. Though the cost for an Incoloy 800 Welded Tube is relatively cheaper, the strength and pressure bearing capacity of a seamless type is much higher. The application of seamless tubes is specifically targeted to those industries that process highly corrosive or flammable compounds, as using this type of Incoloy 800 Tubing ensures safety.

Check MTC EN 10204/3.1B before you buy from Incoloy 800 Tube manufacturers in India

Incoloy 800 Tube

Incoloy 800 Tube

Alloy 800 Seamless Tube

Alloy 800 Seamless Tube

ASME SB 163 UNS N08800 Tubing

ASME SB 163 UNS N08800 Tubing

Incoloy 800 Tube Size Table

W. Nr. 1.4876 Inconel Alloy 800 Tube are produced as per ASTM B163 & ASME SB 163, ASTM B 515/B 751 & ASME SB 515/SB 751

Incoloy 800 Seamless Tube

  • Size (OD): .375" through 1" OD
  • Wall Thickness : .035" through .065"

Incoloy 800 Welded Tube

  • Size (OD): .125" OD through 1" OD
  • Wall Thickness : .035" through .109" wall

1.4876 Incoloy 800 Seamless Tube Specification

ASTM B163 Alloy 800 Seamless Tubing supplier, Buy Incoloy 800 Welded Tube in straight and coiled form

  • ALLOY 800 | N08800 | 1.4876 | NA 15 | X10NICRALTI32-20 | XH32T | ЭИ670 | NCF 800 | Z8NC32-21
  • ALLOY 800H | N08810 | 1.4958 / 1.4876 | NA 15(H) | X5NICRALTI31-20 | XH32T | ЭИ670 | NCF 800H | Z8NC33-21
Incoloy 800 Tube International Specification
  • ASTM B 163 & ASME SB 163 (Seamless Condenser & Heat Exchanger Tubes)
  • ASTM B 407/B 829 & ASME SB 407/SB 829 (Seamless Tubes)
  • ASTM B 515/B 751 & ASME SB 515/SB 751(Welded Tubes)
  • ASME N-20 (Cold Worked Seamless Condenser and Heat Exchanger Tubes for Nuclear Service)
  • BS 3074NA15 (Seamless Tubes)
  • ISO 6207 (Seamless Tubing)
  • ASME Code Case 1325
  • VdTÜV 412
Standard Specification of Incoloy 800 Tubing GB, JIS, SAE, ASTM, EN, DIN, DTD, DS, NF, TOCT, AISI, ASME, AMS
1.4876 Incoloy 800 Tube Standard Tolerances +/- 0.030; tolerance may vary depending on grade and thickness
Incoloy 800 Seamless Tube Size
  •  15 NB to 150 NB IN
  • 1/2" OD - 12" OD
1.4876 Incoloy 800 Welded Tube Size
  •  1/2" OD - 12" OD
  • Guage: 25 SWG - 10 SWG
Nickel Alloy 800 Tube Length Upto 30 meters, Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded, or Custom Cut Lengths
Incoloy 800 UNS N08800 Tube WT 0.40 mm - 12.70 mm
Incoloy UNS No 8800 Tube Schedule 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH
ASME SB 163 UNS N08800 Tube Swg & Bwg 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
ASTM B163 UNS N08800 Tubes manufacturing techniques LSAW, Fabricated, CEW, Redrawn, ERW, EFW, CDW, Welded, DOM, Seam-Welded, Seamless
Origin of Werkstoff 1.4876 Incoloy Tube material Indian, European, Korean, Japanese
Incoloy 800 Din 1.4876 Tube End Types
  • TOE / POE = Treaded One End / Plain One End
  • TBE = Treaded Both Ends
  • POE / BOE = Plain One End / Bevelled One End
  • BBE : Bevel both ends
  • BE : Bevelled end
  • PBE = Plain Both Ends
  • BLE : Bevel large end
  • TOE / BOE = Treaded One End / Bevelled One End
  • BSE : Bevel small end
Incoloy 800 UNS N08800 Tube End Finish low-burr, burr-free, brushed, trovalised
ASTM B163 UNS N08800 Tubes Form Round, Square, Oval, Rectangular, Coil, "U" Shape, Hydraulic & Honed Tubes
Incoloy N08800 Tube Delivery Condition
  • Welded, calibrated
  • Welded and redrawn
  • Seamlessly drawn
  • Polished
  • Annealed and Pickled
  • Hot Finished
  • Bright Annealed
  • Cold Drawn
UNS N08800 Incoloy 800 Tube Packing
  • Ply Wooden Boxes
  • PE Fabric Bundles
  • Steel Strips Bundled
  • Standard seaworthy export packing
  • Plastic Bags, or as required
Incoloy 8800 Tube Value Added Services Cut to size, thread, and groove
Port Mumbai, India
Stocking distributor of leading Incoloy 800 Tube manufacturers
  • Sanyo Special Steel, Japan make Incoloy 800 Tube
  • Schoeller Bleckmann, Austria make 1.4876 Incoloy 800 Seamless Tube
  • Nippon Steel Corporation, Japan make Incoloy UNS No 8800 Tube
  • Sumitomo Metals, Japan make ASME SB 163 UNS N08800 Tubes
  • Seah Steel Corporation, Korea make Incoloy 800 UNS N08800 Seamless Tube
  • Kobe Special Tube, Japan make ASTM B163 UNS N08800 Tubing
  • Tubacex Tubos Inoxidables S.A., Spain make Werkstoff 1.4876 Incoloy Tubes
Incoloy 8800 Tube Dimensional Specification ANSI/ ASME B36.10, B36.19, B2.1
Marking on Alloy 800 Tube
  • Specification
  • Material Grade
  • Nominal Size
  • Schedule or Wall Thickness
  • Method of Manufacturing (Seamless or Welded)
  • Heat Number
  • Manufacturer’s Name or Custom Logo - on request
Marked Tube Sample: ASME SB 163 UNS N08800 12" NB SCH 40S SEAMLESS HEAT NO. XXXX
Application wise types of Werkstoff 1.4876 Incoloy Tubes Incoloy 800 Din 1.4876 Oil Tube, Gas Tube, Fluid Tube, Boiler and Nickel Alloy 800 Heat exchanger Tube
Other Grades INCOLOY® alloy 864 (UNS S35135), INCOLOY® alloy 925 (UNS N09925)

Stock List

Alloy Product form Dimension
INCOLOY 800 (32 Ni/21 Cr) Pickled, cold drawn, annealed 13.72 x 2.24 mm (¼"nb sch40s)

Incoloy UNS No 8800 Tubing Testing method

  • Heat Treatment Charts
  • 100% inspection according to NACE standards
  • Chemical Reports
  • Mechanical Reports
  • PMI Test Reports
  • Laboratory Test Certificate from Govt. Approved Lab
  • NABL Approved Lab Reports
  • Destructive Test Report
  • Non Destructive Test Reports
  • 100% Radiography Test Report for Incoloy 800 UNS N08800 Tube
  • Fumigation Certificates
  • Mill Test Certificates with all Incoloy 800 Tube
  • EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
  • Moisture testing
  • Raw Materials Certificate
  • Form A for Generalized System of Preferences (GSP)
  • Visual Inspection Reports
  • Surface roughness measurement
  • HS Code Commercial Invoice
  • Third Party Inspection for Incoloy 800 Tubing

ASME SB 163 UNS N08800 Tube Price in India

Stockist of Hot Finished W. Nr. 1.4876 Tubes, Alloy 800 Extruded Seamless Tube and Incoloy 800H Tube as per ISO 6207 standard

ASTM B163 UNS N08800 Tube, Seamless Cold Drawn Tubes INR 7,300/ Kg

Contact us for Free quote and sample, you can also mail us on export@oshwin.com.

Types of Incoloy 800 Tube

Incoloy 800 Welded Tube

Incoloy 800 Welded Tube

1.4876 Incoloy 800 Seamless Tube

1.4876 Incoloy 800 Seamless Tube

Incoloy UNS No 8800 Round Tube

Incoloy UNS No 8800 Round Tube

ASME SB 163 UNS N08800 Rectangular Tube

ASME SB 163 UNS N08800 Rectangular Tube

Incoloy 800 UNS N08800 Square Tube

Incoloy 800 UNS N08800 Square Tube

ASTM B163 UNS N08800 Schedule 5S Tube

ASTM B163 UNS N08800 Schedule 5S Tube

Werkstoff 1.4876 Incoloy Schedule 40S Seamless Tube

Werkstoff 1.4876 Incoloy Schedule 40S Seamless Tube

Incoloy 800 Din 1.4876 Polished Tube

Incoloy 800 Din 1.4876 Polished Tube

Nickel Alloy 800 Exhaust Tubing

Nickel Alloy 800 Exhaust Tubing

Incoloy N08800 Heat Exchanger Tube

Incoloy N08800 Heat Exchanger Tube

UNS N08800 Incoloy 800 Boiler Tube

UNS N08800 Incoloy 800 Boiler Tube

Incoloy 8800 Capillary Tube

Incoloy 8800 Capillary Tube

Alloy 800 Gas Tube

Alloy 800 Gas Tube

Incoloy 800 Grade ERW Tube

Incoloy 800 Grade ERW Tube

1.4876 Incoloy EFW Tube

1.4876 Incoloy EFW Tube

Incoloy 800 Alloy SCH 40 Seamless Tube

Incoloy 800 Alloy SCH 40 Seamless Tube

Alloy 800 Precision Tubes

Alloy 800 Precision Tubes

Incoloy 800 Grade Coiled Tube

Incoloy 800 Grade Coiled Tube

1.4876 Incoloy Condenser Tube

1.4876 Incoloy Condenser Tube

Incoloy 800 Alloy Instrument Tubing

Incoloy 800 Alloy Instrument Tubing

Complete range of Incoloy 800 UNS N08800 Tubes

Incoloy 800 UNS N08800 Hydraulic Tubing Incoloy 800 Din 1.4876 Condenser Tubing
ASTM B163 UNS N08800 Welded Tube Thin Wall Nickel Alloy 800 Tubing
Werkstoff 1.4876 Incoloy Instrument Tubing Incoloy N08800 Polish Tubing
Incoloy 800 Din 1.4876 Square Tube UNS N08800 Incoloy 800 Sanitary Tubing
1 inch Incoloy 8800 Tubing High Pressure ASTM B163 UNS N08800 Tube
Incoloy UNS No 8800 Hollow Tubes Werkstoff 1.4876 Incoloy Heat exchanger Tube
Incoloy N08800 Rectangular Tubing Alloy 800 Tube Bends
UNS N08800 Incoloy 800 Electropolished Tube Incoloy 800 Grade Dom Tubing
Incoloy 800 Square Tubing ASME SB 163 UNS N08800 Capillary Tubing
1.4876 Incoloy 800 Round Tubes Re Drawn ASME SB 163 UNS N08800 Tubing
Incoloy UNS No 8800 Gas Tubes Incoloy 800 UNS N08800 Coiled Tubing
Alloy 800 High Pressure Tubes Incoloy 800 Alloy Elliptical and Oval Tubes
Incoloy 800 Grade EFW Tubing ASTM B163 UNS N08800 Triangle Tubes
1.4876 Incoloy ERW Tubing Cold Drawn Incoloy 800 Seamless Tubing
Incoloy 800 Alloy Round Tubing 1.4876 Incoloy 800 Finned Tubes
Nickel Alloy 800 Exhaust Tubing Incoloy UNS No 8800 ERW Tubes
Incoloy 800 Seamless Tube ASME SB 163 UNS N08800 Coil Tubes
1.4876 Incoloy 800 Electropolish Tubing Incoloy 800 UNS N08800 Instrumentation Tubing
Incoloy 8800 Small Diameter Tubing 12mm 1.4876 Incoloy Tubing

ASTM B163 UNS N08800 Boiler Tube Max Temperature

Suitable to use Up to 1500°F (816°C)

Werkstoff 1.4876 Incoloy Heat Exchanger Tube Surface Finishing Treatments

  • Thin Film Engineered Polymer Coatings
  • Curran 1000 T Hybrid Epoxy
  • Phenol Epoxy
  • Epoxy coating
  • Novolac Epoxy
  • Curralon ®
  • Sakaphen- Shell and tube heat exchanger lining
  • High Functionality Epoxy - Curran Coating
  • Curran 1000T

Incoloy 800 Din 1.4876 Square Tube size and weight

Dimensions Wall Weight per Dimensions Wall Weight per
(mm) (mm) metre (kg) (mm) (mm) metre (kg)
12.7 x 12.7 1.20 0.44 40 x40 1.20 1.49
12.7 x 12.7 1.50 0.55 40 x40 1.50 1.85
15 x 15 1.20 0.53 40 x40 2.00 2.45
15 x 15 1.50 0.65 40 x40 3.00 3.75
20 x 20 1.20 0.71 50 x50 1.50 2.32
20 x 20 1.50 0.88 50 x50 2.00 3.08
20 x 20 2.00 1.19 50 x50 3.00 4.65
25 x 25 1.20 0.92 60 x60 2.00 3.71
25 x 25 1.50 1.14 60 x60 3.00 5.49
25 x 25 2.00 1.49 70 x70 3.00 6.53
25 x 25 3.00 2.20 80 x80 2.00 4.98
30 x 30 1.20 1.10 80 x80 3.00 7.53
30 x 30 1.50 1.37 100 x 100 2.00 6.40
30 x 30 2.00 1.84 100 x 100 3.00 9.53
30 x 30 3.00 2.72

Nickel Alloy 800 Capillary Tube Size Chart

Gauge Outside Diameter Tolerance mm Regular Wall (RW) mm Thin Wall (TW) mm Extra Thin Wall (XTW) mm Ultra Thin Wall (UTW) mm
30 0.304 - 0.317 0.064 - 0.089
29 o.330 - 0.342 0.064 - 0.089
28 0.355 - 0.368 0.076 - 0.102
27 0.406 - 0.419 0.089 - 0.115 0.064 - 0.089
26 0.457 - 0.469 0.089 - 0.114
25 0.508 - 0.520 0.115 - 0.140 0.089 - 0.114
24 0.558 - 0.571 0.114 - 0.140 0.089 - 0.114 0.051 - 0.102
23 0.635 - 0.647 0.140 - 0.165 0.089 - 0.114 0.051 - 0.102
22 0.711 - 0.723 0.140 - 0.165 0.096 - 0.121 0.077 - 0.102 0.051 - 0.102
21 0.812 - 0.825 0.140 - 0.165 0.102 - 0.127 0.051 - 0.102
20 0.901 - 0.914 0.108 - 0.165 0.108 - 0.134
19 1.054 - 1.079 0.166 - 0.216 0.102 - 0.140 0.070 - 0.108
18 1.257 - 1.282 0.191 - 0.241 0.127 - 0.165 0.083 - 0.121 0.051 - 0.102
17 1.460 - 1.485 0.177 - 0.229 0.115 - 0.152 0.083 - 0.127 0.057 - 0.102
16 1.638 - 1.663 0.204 - 0.254 0.127 - 0.165 0.096 - 0.133 0.070 - 0.121
15 1.816 - 1.841 0.204 - 0.254 0.127 - 0.165 0.096 - 0.134 0.070 - 0.121
14 2.082 - 2.133 0.216 - 0.292 0.165 - 0.229 0.114 - 0.165 0.076 - 0.134
13 2.387 - 2.438 0.267 - 0.343 0.191 - 0.267
12 2.743 - 2.749 0.267 - 0.321
11 3.023 - 3.073 0.293 - 0.368 0.216 - 0.292
10 3.378 - 3.429 0.318 - 0.394 0.216 - 0.292

N.B (a) Any intermediate size can be supplied on request.
(b) Supplied in sufficiently hard condition and also tested for the stiffness.

Incoloy N08800 Exhaust Tubing Gauge Thickness

GAUGE THICKNESS RANGE (INCH) TYPICAL VALUE (INCH)
22 0.025 - 0.029 0.028
20 0.031 - 0.035 0.035
19 0.038 - 0.042 0.042
18 0.044 - 0.049 0.049
17 0.053 - 0.058 0.058
16 0.060 - 0.065 0.065
15 0.066 - 0.074 0.072
14 0.075 - 0.085 0.083
13 0.087 - 0.097 0.095
12 0.101 - 0.111 0.109
11 0.112 - 0.122 0.12
10 0.126 - 0.136 0.134
9 0.140 - 0.150 0.148
8 0.157 - 0.167 0.165
7 0.175 - 0.185 0.18

UNS N08800 Incoloy 800 Welded Tube Tolerances

  • Straightness: .030" in 3"
  • Wall Tolerance +/- 10%
O.D. Inches Wall Thickness Inches O.D. +/- Inches
1/2" to 1" incl. .025 to .065 .005
Over .065 to .134 .010
1 to 1-1/2" incl. .025 to .065 .008
Over .065 to .134 .010
1-1/2" to 2" incl. .025 to .049 .010
Over .049 to .083 .011
Over .083 to .148 .012
2" to 2-1/2" incl. .032 to .065 .012
Over .065 to .109 .013
Over .109 to .165 .014
2-1/2" to 3-1/2" incl. .032 to .165 .014
Over .165 to .220 .020
3-1/2" to 5" incl. .083 to .165 .020
Over .165 to .220 .025

Available Value Added Services for Incoloy 8800 Round Tube

  • We cut Incoloy 800 welded tubing to your exact dimension
  • 1.4876 Incoloy 800 Tubing can be polished per customer specification
  • Beveling Incoloy UNS No 8800 tubes
  • Heat treating & annealing
  • Honing/ turning process for Incoloy 800 Tube
  • Additional positive material identification (PMI) testing if required
  • Ultrasonic Testing (UT)

Alloy 800 Seamless Tube Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
Inconel Alloy 800 Tube 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
Inconel Alloy 800H Tube 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60

Incoloy 800 Grade Tube Mechanical Properties

Alloy Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Incoloy 800 / 800H Tubing Physical Properties

Properties Metric Imperial
Density 7.94 gm/cm3 0.287 lb/in3

1.4876 Incoloy Tube Equivalent grades table

ALLOY WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Tube Incoloy 800 Equivalent 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Tube Incoloy 800H Equivalent 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T