ASTM B407 UNS N08800 Incoloy 800 Welded Pipe supplier
A benefit of using Incoloy 800 is its stability at elevated temperatures. This nickel-iron-chromium alloy can maintain its austenitic microstructure despite the Incoloy 800 Pipe being exposed to elevated temperatures. According to specification ASTM B407, these pipes are annealed for 15 minutes at a temperature of 1800°F. After annealing, the Alloy 800 Seamless Pipe is cooled in air. The alloy has superior resistance to Carburization. It is a phenomenon that occurs in processing based industries where gas mixtures contain hydrocarbons or Carbon monoxide come in contact with any steel. Carburization generally weakens many regular steel grade and affects their ability to resist both oxidation and sulfidation, due to the depletion of chromium in the matrix and the formation of carbides on the surface of the pipe.
With huge stresses like these, regular steel pipes are bound to crack. However, Inconel 800 pipe manufacturers in India recommend these pipes, precisely for their high tolerance to Carburizing atmospheres. Welded Pipe Incoloy 800 make for a cheaper alternative to seamless type, though their strength is slightly lesser than the latter. The ASME SB 407 UNS N08800 is required to be subject to tests such as either the hydrostatic or nondestructive eddy-current tests, to detect consequential discontinuities, for example - a drilled hole or a transverse tangential notch. The use of these tests on the ASTM B407 UNS N08800 also aids in determining the permissible fiber stress. Mechanical properties of the Werkstoff number 1.4876 Pipe like - yield and tensile strength, elongation in addition to the grain size must conform to the requirements of the specification.
FAA approved Inconel 800 pipe manufacturers in India, check price & sizes of Werkstoff number 1.4876 Pipes.

Incoloy 800 Pipe

Alloy 800 Seamless Pipe
ASTM B407 UNS N08800 Pipe
Incoloy 800 Pipe International Specification |
ASTM B407, ASTM B514, ASTM B829, ASTM B515, ASTM B775, ASTM B751
BS3 3074NA15, ISO 6207, DIN 17459, VdTüV 412 & 434 |
Standard Specification |
ASME, ASTM, AISI, AMS, JIS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
Incoloy 800 Alloy Seamless Pipe Size |
- OD: 4 to 219mm
- Wall Thickness: 0.5 to 20mm
|
1.4876 Incoloy 800 Welded Pipe Size |
|
Incoloy 800 EFW Pipe Size |
|
Incoloy Alloy 800 Pipe WT |
SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
Werkstoff 1.4876 Incoloy Pipe manufacturing techniques |
Seamless / ERW / EFW/ Welded / Fabricated / CDW/ LSAW/ Seam-Welded / Redrawn |
Origin of Incoloy 800 Din 1.4876 pipe material |
Indian, European, Korean, Japanese |
Nickel Alloy 800 Pipe End Types |
- BE : Beveled end
- BBE : Bevel both ends
- BLE : Bevel large end
- BSE : Bevel small end
- TOE / POE = Treaded One End / Plain One End
- TOE / BOE = Treaded One End / Beveled One End
- POE / BOE = Plain One End / Beveled One End
- TBE = Treaded Both Ends
- PBE = Plain Both Ends
|
Form |
Round, Square, Rectangular |
Incoloy N08800 Pipe Length |
Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded |
UNS N08800 Incoloy 800 Pipe Delivery Condition |
Annealed and Pickled, Hot Finished, Polished, Bright Annealed, Cold Drawn |
Incoloy 8800 Pipe Packing |
- Ply Wooden Boxes
- PE Fabric Bundles
- Steel Strips Bundled
- Standard seaworthy export packing
- Plastic Bags, or as required
|
ASTM B167 UNS N08800 Incoloy Pipe Value Added Services |
Cut to size, thread, and groove |
Port |
Mumbai, India |
Stocking distributor of leading Incoloy 800 Pipe manufacturers |
- Sanyo Special Steel, Japan make Incoloy 800 Alloy Pipe
- Schoeller Bleckmann, Austria make 1.4876 Incoloy 800 Seamless Pipe
- Nippon Steel Corporation, Japan make Incoloy 800 Pipe
- Sumitomo Metals, Japan make 1.4876 Incoloy Pipes
- Seah Steel Corporation, Korea make Incoloy Alloy 800 Seamless Pipe
- Kobe Special Tube, Japan make Werkstoff 1.4876 Incoloy Pipe
- Tubacex Tubos Inoxidables S.A., Spain make Incoloy 800 Din 1.4876 Pipe
|
ASTM B167 UNS N08800 Incoloy Pipe Dimensional Specification |
ANSI/ ASME B36.10, B36.19, B2.1 |
Marking on Incoloy UNS No 8800 Pipe |
- Specification
- Material Grade
- Nominal Size
- Schedule or Wall Thickness
- Method of Manufacturing (Seamless or Welded)
- Heat Number
- Manufacturer’s Name or Custom Logo - on request
Marked Pipe Sample: ASTM B407 UNS N08800 12" NB SCH 40S SEAMLESS HEAT NO. XXXX |
Incoloy Alloy 800 Hollow Pipes |
ASME SB 167 UNS N08800 Incoloy High pressure Pipes |
Incoloy 800 Din 1.4876 Custom Pipes |
Nickel Alloy 800 Beveled End Pipes |
Incoloy N08800 Round Pipes |
Werkstoff 1.4876 Incoloy Fabricated Pipes |
Incoloy 800 Alloy Hot Finished Pipe |
Schedule 40S 1.4876 Incoloy 800 Pipe |
Cold Drawn Incoloy 800 Pipe |
1.4876 Incoloy Seam Welded Pipe |
Incoloy Alloy 800 Overlay Pipe |
Werkstoff 1.4876 Incoloy Bush Hex Pipe |
Thick Wall Incoloy 800 Din 1.4876 Pipe |
Thin Wall Nickel Alloy 800 Pipe |
Incoloy N08800 Cold Drawn Seamless Pipe |
High Temperature UNS N08800 Incoloy 800 Pipe |
Seamless Incoloy 8800 Pipe |
ASTM B167 UNS N08800 Incoloy Welded Pipe |
Incoloy 800 UNS N08800 Clad Pipes |
Incoloy 800 Annealed pipes |
Incoloy 800 Grade Rectangle Pipes |
Cold Drawn 1.4876 Incoloy Seamless Pipes |
Incoloy UNS No 8800 ERW Pipe |
ASME SB 167 UNS N08800 Incoloy EFW Pipe |
Incoloy 800 Alloy CDW Pipes |
1.4876 Incoloy 800 Rectangular Pipes |
Incoloy 800 SMLS Pipes |
1.4876 Incoloy Hexagonal Pipes |
Incoloy 8800 Square Pipes |
Incoloy UNS No 8800 Schedule 5S Pipes |
ASTM B167 UNS N08800 Incoloy Schedule 40 Pipes |
Welded UNS N08800 Incoloy 800 Cold Drawn Pipes |
Incoloy UNS No 8800 Polished Pipes |
Incoloy 800 Alloy Exhaust Pipes |
ASME SB 167 UNS N08800 Incoloy Capillary Pipes |
Small diameter 1.4876 Incoloy 800 pipes |