High Pressure Fittings manufacturer

F250c Brass Hydraulic Fittings, Pipe Elbow, High Pressure Hose and Fuel Line Fittings supplier in Mumbai

High pressure fittings manufacturer in India produce different types of high pressure components. The products are often coned and threaded to withstand the high pressure levels. The high pressure hose fittings are used in hydraulic pressure applications where the hoses are flexible and can allow for dynamic movements in the system. The high pressure pipe fittings vary in types as elbows, bends, tees and so on. These fittings are made up of different material types and in different sizes. The fittings vary in size from ¼ inches to 24 inches in most cases. The high pressure hydraulic fittings are made up of the 304, 316 austenitic stainless steel, wrought pressure steels, duplex steels and in alloy steels as well. The high pressure tube fittings are used in high pressure applications such as nuclear power generation plants, steam processing systems, hydraulic lift systems and others.

Buy Swagelok and Parker High Pressure Air/ Npt/ Quick Connect/ Quick Release and Compression Fittings at dealer price in Mumbai. PED approved High Pressure Tube Fittings manufacturer in India

There are also other materials made components such as the high pressure brass fittings. Brass is preferred for the corrosion resistance against dissolved acids, steam and wet gases. The high pressure stainless steel fittings are cost effective, long lasting and strong. However, the stainless steel might not be applied in all types of applications due to the less corrosion resistance. The high pressure compression fittings are used in high compression systems such as water guns and in oil compressors. The materials used vary and the pressure ratings vary as 15000 psi fittings and other high pressure fittings.  Specific types such as the f250c fitting are also available which range from ¼ inches to 1 inch in size with operating temperatures ranging up to 649 degrees Celsius.

High Pressure Pipe Fittings specification

10000 psi and 15000 psi High Pressure Stainless Steel Fittings such as Coupling, Connectors, Pneumatic, Adapters, Swivel Elbow, Threaded, Bulkhead, Nitrogen, and Manifold Fittings manufacturer and exporter in India

Manufacturer of High Pressure Hydraulic Hose Fittings, Adapters, Couplers
Pressure Ratings Up to 22 500 psig (1551 bar), Over 20k to 60k PSI - (414MPa)
Temperature Ratings
  • Up to 1000°F (537°C)
  • -423ºF (-252ºC ) to 1200ºF (649ºC)
Tubing sizes 1/4", 5/16", 3/8", 9/16", and 1".
Connection type Coned-and-threaded connection
Materials of construction 316 Stainless Steel, Super Duplex Alloy 2507, Inconel Alloy 625
End Connections PIPE METRIC, NB, BSP, NPT, BSPT, Socket weld & Screwed
Types NPT, medium-pressure cone and thread adapters, male SAE/MS
Size Range 1/4, 3/8, 1/2, 9/16, 3/4, 1 in.; 6, 10, 12 mm (1 in. only available in 316SS)
Configurations Straights, elbow, tees, cross, port connectors, tube adapters, caps, plugs
Stocking distributor of
  • Parker high-pressure fitting
  • Swagelok high-pressure fitting
Manufacturing process High Pressure Fittings manufactured from cold worked 316 stainless steel.
Manufacturer of all other material

Features

  • Leak Free and gas-tight fittings manufacturer in India
  • Multiple times can reused
  • Easy to install and disassembled
  • Highly resistant to chemicals, vibration, corrosion, high pressures and high temperatures

Type M High Pressure Fittings

Buy directly from High Pressure Fittings manufacturer in India. Wide range of elbow, tee, cross, straight/union coupling & bulkhead coupling styles & in coned & threaded type connection types

  • Stainless Steel Type M Adapters, plugs and caps manufacturers
  • Material: Acid resistant, NACE certified, stainless steel 316L /EN1.4404 cold drawn
Cap Type M Connection 1 Connection 2 Max working pressure Rec. torque (Nm)
  9/16” - 18 UNF - 275.8 MPa 52
  3/4" - 16 UNF - 206.8 MPa 81
  1" - 12 UNF - 206.8 MPa 135
  1-5/16" - 12 UNF - 137.9 MPa 203

All measurements are in mm

Adapter Type M Connection 1 Connection 2 Max working pressure Rec. torque (Nm)
  9/16" - 18 UNF 9/16" - 18 UNF 275.8 MPa conn.1: 52 conn.2: 52
  3/4" - 16 UNF 3/4" - 16 UNF 206.8 MPa conn.1: 81 conn.2: 81
  3/4" - 16 UNF 9/16" - 18 UNF 206.8 MPa conn.1: 81 conn.2: 52
  7/8" - 14 UNF 7/8" - 14 UNF 275.8 MPa conn.1: 109 conn.2: 109
  7/8" - 14 UNF 9/16" - 18 UNF 275.8 MPa conn.1: 109 conn.2: 52
  1" - 12 UNF 1" - 12 UNF 206.8 MPa conn.1: 135 conn.2: 135
  1" - 12 UNF 9/16" - 18 UNF 206.8 MPa conn.1: 135 conn.2: 52
  1" - 12 UNF 3/4" - 16 UNF 206.8 MPa conn.1: 135 conn.2: 81
  1-1/8" - 12 UNF 1-1/8" - 12 UNF 344.7 MPa conn.1: 150 conn.2: 150
  1-1/8" - 12 UNF 9/16" - 18 UNF 344.7 MPa conn.1: 150 conn.2: 52
  1-1/8" - 12 UNF 7/8" - 14 UNF 344.7 MPa conn.1: 150 conn.2: 109
  1-5/16" -12 UNF 1-5/16" -12 UNF 206.8 MPa conn.1: 203 conn.2: 203
  1-5/16" -12 UNF 1" - 12 UNF 137.9 MPa conn.1: 203 conn.2: 135

All measurements are in mm

Type M plug Connection 1 Connection 2 Max working pressure Rec. torque (Nm)
  9/16" - 18 UNF - 275.8 MPa 52
  3/4" - 16 UNF - 206.8 MPa 81
  1" - 12 UNF - 206.8 MPa 135
  1-5/16" -12 UNF - 137.9 MPa 203

All measurements are in mm

High Pressure Fitting Types

Searching for High Pressure Push To Connect Fittings manufacturers in India? Find here all types of Air Line Fittings, Camlock, Swivel, Quick Coupling, and High Pressure Brass Fittings at factory price in Mumbai

High Pressure Hydraulic Fittings

High Pressure Hydraulic Fittings

6000 PSI Tube Fittings

6000 PSI Tube Fittings

High Pressure Straight Union

High Pressure Straight Union

High Pressure Equal Tee

High Pressure Equal Tee

10000 PSI Tube Fitting

10000 PSI Tube Fitting

10000 PSI Adaptor

10000 PSI Adaptor

20000 Psi Fittings

20000 Psi Fittings

10000 PSI Ferrule Fittings

10000 PSI Ferrule Fittings

1000 Bar Ferrule Fittings

1000 Bar Ferrule Fittings

6000 PSI Hex Nipple

6000 PSI Hex Nipple

High Pressure Union

High Pressure Union

6000 PSI Reducing Hex Nipple

6000 PSI Reducing Hex Nipple

High Pressure Hex Nipple

High Pressure Hex Nipple

15000 PSI Pipe Fittings

15000 PSI Pipe Fittings

High Pressure Couplings

High Pressure Couplings

 

Stainless Steel High Pressure Hydraulic Fittings

  • Produced using CNC machine
  • Grade: AISI 316 Stainless Steel fittings manufacturer
  • Similar to Parker 43 and 71 series hose fittings and adapters manufacturers
Stainless Steel High Pressure Hydraulic Fittings dimensions
FLANGE SIZE HOSE BORE DIMENSIONS
DN DASH C D L
1/2" 12 8 31.8 23.9 7.9
3/4" 20 12 41.3 31.7 8.9
1" 25 16 47.6 38 9.6
1.1/4" 32 20 54 43.6 10.4
1.1/2" 40 24 63.5 50.8 12.7
2" 50 32 79.4 66.5 12.7

High Pressure Fitting Dimensions

Double ferrule tube fittings as per MIL-F-18866/ SAE J514

Double ferrule High Pressure Tube Fitting Dimensions

 

THREAD E DN DASH C S1 S2
7/16"X20 6 4 8.5 17 17
1/2"X20 6 4 9.5 19 19
1/2"X20 8 5 9.5 19 19
9/16"X18 8 5 10 19 19
9/16"X18 10 6 10 19 19
3/4"X16 10 6 11 24 24
3/4"X16 12 8 11 24 24
 7/8"X14 16 10 11 27 27
1.1/16"X12 20 12 13.5 32 32
1.5/16"X12 25 16 14.5 41 41
1.5/8"X12 32 20 15.5 50 50
1.7/8"X12 40 24 18.5 55 55
2.1/2"X12 50 32 24.5 70 70

Torque of High Pressure Fittings

Coupling and Adapter Torque

Manufacturer of Machined or Flared For 37° & 45°

Size Steel Brass
Ft. Lbs. Newton-Meters Ft. Lbs. Newton-Meters
Dash Inches Min Max Min Max Min Max Min Max
-4 1/4 10 11 13 15 5 6 6-3/4 9
-5 5/16 13 15 18 20 7 9 10 13
-6 3/8 17 19 23 26 12 15 17 20
-8 1/2 34 38 47 52 20 24 27-2/3 33
-10 5/8 50 56 69 76 34 40 46-1/3 55
-12 3/4 70 78 96 106 53 60 72-1/3 82
-16 1 94 104 127 141 74 82 100-1/2 111
-20 1-1/4 124 138 169 188 75 83 101-1/2 113
-24 1-1/2 156 173 212 235 79 87 107 118
-32 2 219 243 296 329 158 175 214 237

10000 Psi High Pressure Fittings

MAXIMUM OPERATING PRESSURE 10000 psi
CONNECTION 1 THREAD SIZE 1/8", 1/4", 3/8", 1/2", 3/4", 1" inch
CONNECTION 2 THREAD SIZE 1/8", 1/4", 3/8", 1/2", N/A inch
CONNECTION TYPE Male, Female, N/A
NPT
MATERIALS OF CONSTRUCTION 316L Stainless Steel, Brass, Hastelloy C, Steel A 105, Monel, Incoloy, Inconel 600, High Duty Bronze
CONFIGURATION Street Elbow SE, Male Hex Long Nipple MHLN, Female Hex Coupling FHC, Adapter RA, Male Hex Nipple MHN, Male Elbow ME, Reducing Bushing RB, Female Elbow FE, Male Tee MT, Female Cross FX, Female Tee FT, Pipe Cap CP manufacturer
OVERALL LENGTH 2.00, 3.00, 4.00, N/A inch
USES
  • Instrumentation isolation lines
  • Hydro testing setup
  • High pressure media control
End connections PIPE NB, NPT, BSP, BSPT, METRIC,Socket weld & Screwed

15000 psi stainless steel fittings

High and Ultra-High Pressure Fittings (60K & 150K)

BODY STYLE Elbow, Tee, Cross, Coupling, Bulkhead Coupling, Plug, Street Elbow, Male Elbow, Male Tee, Street Tee, Male Branch Tee, Hex Close Nipples
CONNECTION SIZE 1/4", 5/16", 3/8", 9/16", and 1" NPT
MATERIALS OF CONSTRUCTION 316L Stainless Steel, Brass, Hastelloy C, Steel A 105, Monel, Incoloy, Inconel 600, High Duty Bronze fittings manufacturer
Temperature Range  -423ºF (-252ºC ) to 1200ºF (649ºC).
USES
  • Oil and Gas
  • Chemical
  • Petrochemical
Manufactured from cold worked 316 stainless steel
15,000PSI SERIES TUBE FITTINGS
  • Maximum working pressure: 15,000 psig (1034 bar)
  • High tensile 316 Stainless Steel as raw material

Compare our price with Parker 15000 psi fittings price list

Product US $ Price in Philippines peso Price in Malaysia Ringgit
1/4" Female NPT to 1/4" Female NPT Elbow -316 Stainless Steel $144 6924.31 Philippines peso 586.22
3/8" Female NPT to 3/8" Female NPT Elbow - 316 Stainless Steel $155 7453.25 Philippines peso 631.00
3/4" Female NPT to 3/4" Female NPT Elbow - 316 Stainless Steel $280 13463.94 Philippines peso 1139.88

High Pressure Fitting Standard

Pressures up to 60,000 psi (4140 bar)
sizes 1/4, 3/8, 9/16, and 1 inch nominal outside diameter tubing
Standard Fitting Material UNS S31600, UNS S31600/S31603, 316/316L stainless steel, cold worked standards. UNS S30400/ S30403, SS 304
Standard Operating Temperature -423°F to 1200°F (-252° to 650°C)
Manufacturer of High pressure 45° elbows, reducer elbows, reducer 45° elbows and others

Npt High Pressure Fittings

Parker high pressure npt fittings available in a broad range of sizes, materials, and configurations

Fitting Type Male in-line stainless steel compression type with nut & olive
Material NPT - Stainless Steel Compression Fitting
Thread 1/8" NPT, 1/2" NPT, 1/4" NPT, 3/4" NPT and 3/8" NPT available
Probe Dia Used for both metric & imperial probe diameters 1.0mm - 12.0mm

SS High Pressure Bulkhead Fitting

SS High Pressure Bulkhead Fitting
Connection Type 16MF
Fitting Pattern Bulkhead Coupling
Tube O. D. 1 in
Orifice Size range 0.438 in
Dimension A 3.50 in
Dimension B 2.00 in
Dimension C 2.36 in
Dimension D 1.69 in
Dimension E 0.47 in
Working Pressure Up to 65,000 psi
Component Option
  • 1 in. Collar (43C16M)
  • 1 in. Gland (43G16M)
  • 1 in. Plug (43P16M)
  • 1 in. Tubing Cap (43TC16M)
Terms and Conditions
  • All dimensions just for the reference only and subject to change.
  • All general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

High Pressure Elbow Fitting

316 Stainless steel Coned and threaded Ferrule Elbow Price: $45.00

  • ELBOWS - MALE X FEMALE -BSP
  • ELBOWS - FEMALE X FEMALE - BSP
  • ELBOWS - MALE X MALE BSP

Important: A fitting with a 1/2” cross section measurement does NOT mean that it is a 1/2” size fitting.

Stainless Steel High Pressure Compression Fittings

Pressure 60 kpsi and 90 kpsi in
Type coupling, elbow, tee, and cross, swivel joints, high pressure filters, plugs, and reducers configurations

High Pressure Stainless Steel Swivel Fittings

Multi Swivel couplings

Inner diameter Work pressure Thread Seals Materials
5mm to 65mm Vacuum to 630bar BSP & NPT Nitril (NBR), FKM, EPDM, PTFE, PU, FFKM AISI 316L

Swivel Size Material Temperature
Stainless steel Swivel 3/8" BSP, available with bore Ø 11mm (60 bar)
3/8" BSP 316L / NBR -15°C / +70°C
3/8" BSP 316L / EPDM -50°C / +150°C
3/8" BSP 316L / VITON -10°C / +180°C
     
Stainless steel Swivel 1/2" BSP, with bore Ø 11mm (60 bar) of Ø 15mm (30 bar)
1/2" BSP 316L / NBR -15°C / +70°C
1/2" BSP 316L / EPDM -50°C / +150°C
1/2" BSP 316L / VITON -10°C / +180°C
     
Stainless steel Swivel 3/4" BSP, with bore Ø 15mm (30 bar) of Ø 20mm (20 bar)
3/4" BSP 316L / NBR -15°C / +70°C
3/4" BSP 316L / EPDM -50°C / +150°C
3/4" BSP 316L / VITON -10°C / +180°C
     
Stainless steel Swivel 1" BSP, available with bore Ø 25mm (20 bar)
1" BSP 316L / NBR -15°C / +70°C
1" BSP 316L / EPDM -50°C / +150°C
1" BSP 316L / VITON -10°C / +180°C
     
Stainless steel Swivel 1 1/4" BSP, available with bore Ø 25mm (20 bar)
1 1/4" BSP 316L / NBR -15°C / +70°C
1 1/4" BSP 316L / EPDM -50°C / +150°C

1 1/4" BSP

316L / VITON -10°C / +180°C
 
Stainless steel Swivel 1 1/2" BSP, available with bore Ø 40mm (20 bar)
1 1/2" BSP 316L / NBR -15°C / +70°C
1 1/2" BSP 316L / EPDM -50°C / +150°C

1 1/2" BSP

316L / VITON -10°C / +180°C
     
Stainless steel Swivel 2" BSP, available with bore Ø 40mm (20 bar)
2" BSP 316L / NBR -15°C / +70°C
2" BSP 316L / EPDM -50°C / +150°C

2" BSP

316L / VITON -10°C / +180°C
 
Stainless steel Swivel 2 1/2" BSP, available with bore Ø 65mm (15 bar)
2 1/2" BSP 316L / NBR -15°C / +70°C
2 1/2" BSP 316L / EPDM -50°C / +150°C

2 1/2" BSP

316L / VITON -10°C / +180°C
 
Stainless steel Swivel 3" BSP, available with bore Ø 65mm (15 bar)
3" BSP 316L / NBR -15°C / +70°C
3" BSP 316L / EPDM -50°C / +150°C

3" BSP

316L / VITON -10°C / +180°C
 
Stainless steel Swivel 4" BSP, available with bore Ø 100mm (10 bar)
4" BSP 316L / NBR -15°C / +70°C
4" BSP 316L / EPDM -50°C / +150°C

4" BSP

316L / VITON -10°C / +180°C

Stainless Steel High Pressure Bsp Fittings

  • MALE BSPP X MALE BSPP ADAPTER
  • MALE BSPP X MALE BSPT ADAPTER
  • MALE JIC X MALE BSPP ADAPTER
  • MALE BSPP X MALE NPTF ADAPTER
  • MALE JIC X MALE BSPT ADAPTER
  • MALE BSPP HEX HEAD PLUG
  • FEMALE BSPP SWIVEL CAP
  • MALE BSPP X FEMALE NPTF ADAPTER
  • MALE NPTF X FEMALE BSPP ADAPTER
  • BSPP TO FEMALE BSP BUSHING
  • FEMALE BSP X FEMALE BSP ADAPTER
  • MALE JIC X MALE BSPP 90 ELBOW ADAPTER
  • MALE JIC X MALE BSPT 90 ELBOW ADAPTER
  • MALE JIC X MALE METRIC ADJUSTABLE 90 ELBOW ADAPTER
  • MALE JIC X FEMALE BSPP SWIVEL ADAPTER

High Pressure Jic Fitting

JIC flare fittings

High Pressure JIC flare fittings
THREAD E DN DASH C S1 S2
7/16"X20 6 4 9 17 17
9/16"X18 10 6 10 19 19
3/4"X16 12 8 11 24 22
7/8"X14 16 8 12 27 27
1.1/16"X12 20 12 13 32 32
1.5/16"X12 25 16 14 38 38
1.5/8"X12 32 20 15 50 50
1.7/8"X12 40 24 19 55 55

JIC Female Elbow Fittings

High Pressure JIC Female Elbow Fittings

E HOSE BORE DIMENSIONS
THREAD E DN DASH C S1 H
7/16"X20 6 4 8.5 17 30
1/2"X20 6 4 9.5 19 31.5
1/2"X20 8 5 9.5 19 34.5
9/16"X18 6 4 10 19 31.5
9/16"X18 8 5 10 19 34.3
9/16"X18 10 6 10 19 36
3/4"X16 10 6 11 24 38.4
3/4"X16 12 8 11 24 44.5
7/8"X14 10 6 11 27 39.9
7/8"X18 12 8 11 27 45
7/8"X18 16 10 11 27 50
1.1/16"X12 12 8 13.5 32 46
1.1/16"X12 16 10 13.5 32 51.5
1.1/16"X12 20 12 13.5 32 57.6
1.3/16"X12 20 12 14.5 36 58
1.5/16"X12 20 12 14.5 41 59.5
1.5/16"X12 22 14 14.5 41 62
1.5/16"X12 25 16 14.5 41 71.6
1.5/8"X12 25 16 15.5 50 73
1.5/8"X12 32 20 15.5 50 82
1.7/8"X12 32 20 18.5 55 82
1.7/8"X12 40 24 18.5 55 93.4
2.1/2"X12 50 32 24.5 75 118.9

Stainless Steel High Pressure Fittings Price List

Product Description Price List ex Mumbai
Tee adapter. 1/4" and 3/8" NPTF female and 3/8" NPTF male ports. $61.30
Double tee adapter. Three 3/8" NPTF female ports. $50.90
Swivel connectors - 3/8" NPTF male, 3/8" NPSM female. $22.00
45° fitting. Male x female 1/4" NPTF ends. For mounting gauge at an angle on connection such as 9670. $52.90
Connectors. 1/4" NPTF femate and 3/8" NPTF male. $14.90
Coupling - 3/8" NPTF female Both ends $30.20
Street elbow - 3/8" NPTF ends. Male x female $52.00
Male connector. 3/8" NPTF male ends, 111/16" long, $10.10
Male connector. 3/8" NPTF male ends, 21/4" long $27.70
Coupling - 1/4" NPTF female x 3/8" NPTF female. $36.40
Connector - 1/4" NPTF female $24.00
Male connector - 1/4" NPTF male ends, 1-11/16" long, $26.60
Cross - 3/8" tube. $124.00
45° gauge fitting - 1/4" NPTF female at 45°, 3/8" NPTF male and female $64.70