AISI or SAE 4130 grade Chromoly 4130 Pipes Suppliers India
What is AISI 4130 Pipe?
AISI 4130 is a chromium molybdenum alloy steel specification. It is supplied as round bar commonly in the hardened and tempered condition with a hardness of 18-22 HRc. With a lower carbon content range AISI 4130 provides better weldability, at the expense of through thickness strength, than that of other oil and gas steel grades such as AISI 4140. AISI 4130 alloy steel is readily machineable in the supply condition of 18-22 HRc.
AISI 4130 is used for a variety of applications in the oil and gas sector. Typical applications include components such as valve bodies, pumps and fittings. AISI 4130 steel is usually supplied ready heat treated with a hardness of 18-22HRC. If further heat treatment is required annealed AISI 4130 should be heated slowly to 870-890°C and after adequate soaking at this temperature quench in oil. Temper as soon as tools reach room temperature
AISI or SAE 4130 grade is a low-alloy steel containing chromium and molybdenum as strengthening agents. The steel has good strength and toughness, weldability and machinability.AISI/SAE 4130 grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength up to around 600º F (315º C). It shows good overall combinations of strength, toughness. and fatigue strength.
We are specialized in offering aisi 4130 pipe which are used in various engineering applications and can be availed in various grades lik ASTM A519 Grade 4130 Pipe these grades are available in the form of aisi 4130 pipe
- Surface treatment: ASTM A519-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating,etc; Or Oil-dip paint black with two plastic caps on each end
- Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B)
- Relevant Test: ASTM A519-Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test, Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive electric Test,Hydrostatic Test, magnetic particle testing
- Manufacture methods: Cold Finished method or hot finished Method.
Applications: Automobile and Bearing Industry, Mechanical and Structral Purpose, Hydraulic and Petrochemical Purpose, etc.
Are you looking for a reliable AISI 4130 Pipe dealer & distributor in below countries:
Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin
Fabrication and Heat Treatment
AISI 4130 steel can be easily machined using conventional methods. However, machining becomes difficult when the hardness of the steel is increased.
Forming of AISI 4130 steel can be performed in the annealed condition.
Welding of AISI 4130 steel can be performed by all commercial methods.
AISI 4130 steel is heated at 871°C (1600°F) and then quenched in oil. This steel is usually heat-treated at temperatures ranging from 899 to 927°C (1650 to 1700°F).
Forging of AISI 4130 steel can be performed can be performed at 954 to 1204°C (1750 to 2200°F).
Hot working of AISI 4130 steel can be done at 816 to 1093°C (1500 to 2000°F).
AISI 4130 steel can be cold worked using conventional methods.
AISI 4130 steel can be annealed at 843°C (1550°F) followed by air cooling at 482°C (900°F).
Tempering of AISI 4130 steel can be performed at 399 to 566°C (750 to 1050°F), depending on the desired strength level.
Hardening of AISI 4130 steel can be done with cold working or heat treatment.
We have our sales representative in Mumbai, Lucknow, Coimbatore, Imphal, Mysore, Ratlam, Delhi, Kanpur, Darjeeling, Jalandhar, Nagpur, Solapur, Kolkata, Allahabad, Dehradun, Jammu, Nashik, Srinagar, Chennai, Ahmedabad, Faridabad, Jamshedpur, Nellore, Surat, Bangalore, Chandigarh, Ghaziabad, Jhansi, Patna, Siliguri, Hyderabad, Amritsar, Noida, Kochi, Pune, Thiruvanthapuram, Jaipur, Aizawl, Guwahati, Kozhikode, Raipur, Vishakhapatnam, Jabalpur, Bhopal, Gwalior, Ludhiana, Rajahmundry, Thane, Agra, Bhubaneshwar, Gurgaon, Madurai, Rajkot, Varanasi, Bhilai, Haridwar, Meerut, Ranchi, Ahmednagar, Akola, Amravati, Aurangabad, Baramati, Beed, Bhandara, Bhiwandi, Buldhana, Chandrapur, Chimur, Dahanu, Dhule, Dindori, Erandol, Gadchiroli, Hatkanangle, Hingoli, Ichalkaranji, Jalgaon, Jalna, Karad, Khed, Yavatmal, Kolaba, Kolhapur, Kopargaon, Latur, Malegaon, Mumbai, Nagpur, Nanded, Nandurbar, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Rajapur, Ramtek, Ratnagiri, Raver, Sangli, Satara, Shirdi, Shirur, Solapur, Thane, Wardha, Washim, Andhra Pradesh, Jammu and Kashmir, Nagaland, Uttarakhand, Haryana, Lakshadweep, Arunachal Pradesh, Jharkhand, Odisha, West Bengal, Himachal Pradesh, Assam, Karnataka, Punjab, Andaman and Nicobar Islands, Puducherry, Bihar, Kerala, Rajasthan, Chandigarh, Meghalaya, Chhattisgarh, Madhya Pradesh, Sikkim, Dadar and Nagar Haveli, Mizoram, Goa, Maharashtra, Tamil Nadu, Daman and Diu, Tripura, Gujarat, Manipur, Telangana, Delhi, Uttar Pradesh etc. in India.
We also stock:
- AISI 4130 Pipes
- AISI 4130 SEAMLESS Pipes
- ASTM A519 4130 Pipes
- ASTM A519 4130 SEAMLESS Pipes
- AISI 4130 75K SEAMLESS Pipes
- AISI 4130 DRILLING Pipes
- 4130 Tubes
- AISI 4130 Tubes
- AISI 4130 SEAMLESS Tubes
- AISI 4130 L 80 SEAMLESS Tubes
- A519 4130 Seamless Alloy Steel Tube
- 4130 Tubing
- Chrome Moly Tubing 4130
- 4130 ALLOY STEEL ROUND SEAMLESS TUBING
- Alloy Steel 4130 Round Tubing
- 4130 Aircraft Tubing
- 4130 seamless tubing
- 4130 Steel Rectangular Tubing
- ASTM A519 4130 Mechanical Tubing
- AISI 4130 Flanges
- Alloy Steel AISI 4130 Fittings